IDK msd-804fd User Manual page 107

Note 2:
CEC connection is a one-on-one basis; it cannot connect multiple inputs and outputs. If you set multiple
outputs to connect to the same input, only a smaller output number is connected preferentially and other
outputs are not connected. For example, if you set both OUT1 and OUT2 to IN2, OUT1 is connected to IN2,
while OUT 2 is not connected.
Note 3:
To use CEC, enable HDMI link control of the connected device (such as digital TV, Blu-ray disc recorder, and
so on). The MSD is counted as a CEC device, and several CEC devices including the MSD may be displayed
on the CEC operation window. In this case, select the device you want to operate. (For settings and operation
of your device, refer to the manual of the device.)
1. To set the CEC using menu:
MSD-804FD
↓ SET key
[FUNCTION SELECT]
OUTPUT SETTING
↓ SET key
[OUTPUT SETTING]
CEC CONNECTION
↓ SET key
[OUT1A CEC]
NOT CONNECTED
↓ SET key: Applies settings.
[CEC CONNECTION]
NOW UPDATE...
↓
[OUTPUT SETTING]
CEC CONNECTION
Note:
If you do not press the "SET" key, the CEC is not changed. Make sure to press the "SET" key.
*OUT1B to OUT4B are available only if HDBaseT output option is mounted.
2. To set the CEC using commands:
@SCE: Set CEC
@GCE: Get CEC
Top
keys: Select "OUTPUT SETTING".
keys: Select "CEC CONNECTION".
keys: Select the desired CEC connection.
keys: Select the output (OUT1A to OUT4A, OUT1B to OUT4B)*
Displays the message for 1 second before automatically returning to
the previous screen.
107
MSD-804FD User's Guide