Table of Contents
Advertisement
1. To edit the control command using menu:
MSD-804FD
↓ SET key
[FUNCTION SELECT]
PRESET COMMAND
↓ SET key
[PRESET COMMAND]
COMMAND EDIT
↓ SET key
[COMMAND EDIT]
CMD
1
↓ SET key
PORT:COM SIZE: 0BYTE
DELAY: 0s000ms
↓◄►keys
After this step, procedures differ depending on the settings of "PORT".
Go to steps I, II, or III depending on the PORT setting being selected.
Top
keys: Select "PRESET COMMAND".
keys: Select "COMMAND EDIT".
▲▼keys: Select the desired control command (CMD 1 to CMD 32).
"MEMO" is displayed on the right of the command number.
↑ ESC key: Cancels the setting and returns to the previous screen.
▲▼keys: Set the desired port (COM, CEC).
154
MSD-804FD User's Guide
Advertisement
Table of Contents
