Input Masking [Input Masking] - IDK msd-804fd User Manual

7.3.8

Input masking [INPUT MASKING]

Any unnecessary area (top/bottom and right/left) can be hidden by using the masking setting.
You can set the masking amount for each input by using this menu or for each output by following "7.3.12
Output masking [OUTPUT MASKING]". Normally, set the masking of each input in settings of each input. If
you want to limit the display area on the output screen, set the masking for each output.
▪ Left side masking: Masked in a unit of pixel [Default]: 0
▪ Right side masking: Masked in a unit of pixel [Default]: Horizontal input size
▪ Top side masking: Masked in a unit of line [Default]: 0
▪ Bottom side masking: Masked in a unit of line [Default]: Vertical input size
( 0, 0 )
Left
masking
The range of set values depends on settings of "7.3.6 Input position [INPUT POSITION]", "7.3.7Input size
[INPUT SIZE]" and masking. If you change the display position or display size, the display range before
changing is kept and settings of masking are automatically changed. Default value (no masking) of the left/top
sides is 0 while that of the right/bottom sides is the input size setting.
1. To set the input masking (the number of pixels) using menu:
MSD-804FD
↓ SET key
[FUNCTION SELECT]
OUTPUT TIMING
↓ SET key
[OUTPUT TIMING]
INPUT MASKING
↓ SET key
[IN1 MASKING] L:
R:1920 T:
↓
[IN1 MASKING] L:
R:1920 T:
↓
Top masking
Bottom masking
[Fig. 7.10] Input masking
Top
keys: Select "OUTPUT TIMING".
keys: Select "INPUT MASKING".
0 keys: Set the left side masking of IN1.
0 B:1080
keys
0 keys: Set the right side masking of IN1.
0 B:1080
keys
Right
masking
( Horizontal size, Vertical size)
63
MSD-804FD User's Guide
For each input port/input signal