Lan Settings - IDK msd-804fd User Manual

7.11 LAN settings

The MSD does not support automatic acquisition of IP address using DHCP (Dynamic Host Configuration
Protocol). If you use the MSD in a network with DHCP, keep a fixed IP address. If controlling external devices
connected over LAN from the MSD, keep several fixed IP addresses.
The MSD has two kinds of connectors that control the MSD or peripheral devices:
1. LAN port: controlling the MSD or peripheral devices externally
2. HDBaseT output connectors (OUT1B to OUT4B): controlling peripheral devices via twisted pair cable
receiver (HDC series) of connected devices. OUT1B to OUT4B are available only if HDBaseT output option is
mounted.
IN 1 IN 2 IN 3
HDMI/DVI HDMI/DVI HDMI/DVI
AUDIO AUDIO AUDIO AUDIO AUDIO AUDIO
IN1 IN2 IN3 IN4 IN5 IN6
L L L L L L
R R R R R R
Projector
IN 4 IN 5 IN 6
HDMI/DVI HDMI/DVI HDMI/DVI
AUDIO AUDIO AUDIO AUDIO AUDIO
IN7 IN8 OUT1 OUT2 OUT3
L L L L L
R R R R R
[Fig. 7.29] LAN port
Cat6 Rx for HDMI
LAN port
Rx
STATUS STATUS
POWER POWER POWER
UPDATE
IN 7 IN 8 OUT 1
HDMI/DVI HDMI/DVI HDMI/DVI
RS-232C CH1
AUDIO
OUT4
L
LAN
RS-232C CH2
UPDATE
R
LAN port
PC
137
MSD-804FD User's Guide
HDC-RH100-C
!
CAUTION
DON'T
CONNECT
LAN
HDBaseT output
LINK LINK LINK HDCP HDCP HDCP
connector
OUT 1 OUT 2 OUT 3
HDBaseT HDBaseT HDBaseT
B B B
LINK LINK LINK
A OUT 2 A OUT 3 A OUT 4
HDMI/DVI HDMI/DVI HDMI/DVI
S/N
OUT 4
HDBaseT
B
LINK
FG
A
AC 100-240V 50/60Hz
FUSE
T2.5A 250V