Input Size [Input Size] - IDK msd-804fd User Manual

[IN1 POSITION]
H: 0 V:
↓ ESC key: Returns to the previous screen
2. To set the input video position (pixel position) using commands:
@SNP: Set input position
@GNP: Get input position
7.3.7

Input size [INPUT SIZE]

You can set the display size of input video by the number of pixels. The video size is scaled based on the
upper left of the input video set in "7.3.6 Input position [INPUT POSITION]".
You can set the size for each input by using this menu or for each output by following "7.3.11 Output size
[OUTPUT SIZE]". Normally, set the position, size, and masking of each input separately by using the settings
of each input. If edges are cut off due to enlarged display in the display device or if you want to enlarge output
video of all channels at once, set the position for each output.
▪ Horizontal size: Scaled in a unit of pixel [Default]: Horizontal output resolution
▪ Vertical size: Scaled in a unit of line [Default]: Vertical output resolution
Note:
If the resolutions of each output are not the same, the resolution of OUT1 will be the standard.
[Horizontal size]
Keys: Set the vertical position of IN1.
0
[Fig. 7.9] Input size
For each input port/input signal
[Vertical size]
61
MSD-804FD User's Guide