Table of Contents
Advertisement
7.16.8 Display device status [MONITOR STATUS]
You can display the status of display device connected to video output connectors.
1. To display status of display device using menu:
MSD-804FD
↓ SET key
[FUNCTION SELECT]
OTHERS
↓ SET key
[OTHERS]
MONITOR STATUS
↓ SET key
OUTA1 2 3 4B1 2 3 4
S S N
↓ ▲▼ keys
[OUT1A MONITOR] H30
HDCP SUPPORT
▲▼ keys
[OUT4B MONITOR]
UNCONNECTED
↓ ESC key: Returns to the previous screen
1
*
OUT1B to OUT4B are available only if HDBaseT output option is mounted.
A) To output all connectors, channel number is displayed on the upper row and HDCP authentication state is
displayed on the lower row with one of the following alphabet characters.
B) To output each connector, HDCP authentication state is displayed on the lower row with one of the
following character strings.
A)
S
HDCP SUPPORT
N
E
HDCP ERROR
C
HDCP CHECK NOW
D
DISCONNECT
L
DISCONNECT
O
Cat6 NO LINK
UNCONNECTED
*2
only for OUT1B to OUT4B.
Top
▲▼keys: Select "OTHERS".
▲▼keys: Select "MONITOR STATUS".
Displays the status of the display device connected to output
S S N
connectors.
Displays the statuses of display device connected to OUT1A.
Displays the statuses of display device connected to OUT4B
B)
HDCP-compliant display device is connected.
HDCP NOT
Non-HDCP-compliant display device is connected.
SUPPORT
HDCP-compliant display device is connected, but the
authentication failed.
Status of display device is being checked. (such as when
connection status of monitor is changed.)
MONITOR
Monitor is disconnected (displayed only for 1 second)
Cat6 LINK
Cat5e/Cat6 cable is unplugged. (displayed only for 1 second)
Cat5e/Cat6 cable is not connected.
No display device is connected.
*1
Description
214
MSD-804FD User's Guide
*1
.
*2
*2
Advertisement
Table of Contents
