Table of Contents
Advertisement
The set range and default value depend on settings of "7.3.1 Output resolution [RESOLUTION]", and the
range is quarter to quadruple of the output resolution.
Default is the same as the resolution setting, and the video is displayed on the full screen of the display
device.
1. To set the input size (the number of pixels) using menu:
MSD-804FD
↓ SET key
[FUNCTION SELECT]
OUTPUT TIMING
↓ SET key
[OUTPUT TIMING]
INPUT SIZE
↓ SET key
[IN1SIZE]H:1920/1920
LINK:ON V:1080/1080
↓
[IN1SIZE]H:1920/1920
LINK:ON V:1080/1080
↓
[IN1SIZE]H:1920/1080
LINK:OFF V:1080/1080
↓ ESC key: Returns to the previous screen
*1
If you set "LINK" to ON", only horizontal size can be set. If you set the horizontal size, the current aspect
ratio is kept and the vertical size is also set. If either horizontal or vertical size reaches the limit, you cannot
set the larger values.
*2
Only if you set "LINK" to "OFF", you can set the vertical size.
2. To set the input size (the number of pixels) using commands:
@SNS: Set input size
@GNS: Get input size
Top
keys: Select "OUTPUT TIMING".
keys : Select "INPUT SIZE".
keys: Set "LINK" to "OFF" or "ON" for H and V.
keys
keys: Set horizontal size of IN1. Numbers following "/" mean
horizontal output resolution.
keys
keys: Set vertical size of IN 1. Numbers following "/" mean
vertical output resolution.
*2
62
MSD-804FD User's Guide
*1
Advertisement
Table of Contents
