Audio Settings - IDK msd-804fd User Manual

7.8

Audio settings

HDMI digital audio supports the following formats. For audio output of devices connected to the HDMI input
connectors (such as DVD players), set a format supported by both the MSD and display device connected to
HDMI output connector (such as display devices and AV amplifier). However, as factory default, only "2
channel linear PCM" can be input. If you want to use "Multi channel linear PCM" or bit stream signals
(compressed audio), set "7.9.5 Audio format [AUDIO FORMAT]" and "7.9.6 Speaker configuration
[SPEAKER]".
Multi channel linear PCM
AC-3, Dolby Digital, DTS
Dolby Digital+, DTS-HD, Dolby TrueHD
If Multi channel linear PCM signals are input to digital audio, two channels set in "7.8.10 Multi-channel audio
output [MULTI AUDIO]" or down-mixed audio is output to analog audio and display devices that do not
support multi linear PCM.
Blu-ray disc player
[Table 7.3] Supported formats of HDMI digital audio
Audio format
2 channel linear PCM
AAC
5.1ch
Digital input
Input level
[Fig. 7.25] I/O of multi-channel signals
2ch, 32 kHz to 192 kHz, 16/20/24bit
8ch, 32 to 192kHz, 16/20/24bit
5.1ch
Digital output
Selected 2 ch or down mixed audio
Matrix Switcher
Analog output
Any 2 ch or down mixed audio
Digital output
Output level
110
MSD-804FD User's Guide
Description
Bit stream
Bit stream
Bit stream
AV Amplifier supporting multi
channels
Amplifier built in speaker
LCD monitor not supporting multi
channels