Table of Contents
Advertisement
[CONNECTION2]
PORT:
1100
or
[CONNECT2 PASSWORD]
1:
↓
[CONNECTION3]
FUNC:RECIEVER
[CONNECTION8]
FUNC:RECIEVER
↓
[OUT1B]
FUNC:TRANSMITTER
↓
[OUT1B]
IP:192.168. 1.198
↓
[OUT1B]
PJLink:OFF
↓
[OUT1B]
PORT:
1100
or
[OUT1B PASSWORD]
1:
[OUT4B]
FUNC:TRANSMITTER
↓ SET key: Applies settings.
[LAN FUNCTION]
NOW UPDATE...
↓
[LAN]
FUNCTION
*1
Settable only if you select "TRANSMITTER".
*2
If setting PJLink protocol to "OFF", set the port number of the destination. If turning it "ON", set the
password.
*3
The number of characters at the cursor position is displayed at the lower left, and the maximum number of
the characters is 16. Space would be the final character, and characters before the space will be registered
as the password.
*4
OUT1B to OUT4B are available only if HDBaseT output option is mounted.
*5
The operation mode of HDBaseT output connector (OUT1B to OUT4B) is fixed at "TRANSMITTER".
keys: Set destination port no. of CONNECTION 2 (1 to 65535).
keys: Set the password of CONNECTION 2 (30 to 39, 41 to 5A, 61 to
7A of ASCII codes).
◄►keys: Moves the cursor to the next character (Up to 32 characters).
keys
keys: Select the desired mode of CONNECTION 3.
(RECIEVER, TRANSMITTER)
keys
keys: Select the desired mode of CONNECTION 8.
(RECIEVER, TRANSMITTER)
keys
keys: OUT1B
keys
keys: Set the IP address of OUT1B (0 to 255).
keys: Moves the cursor.
keys
keys: Set PJLink protocol to "ON" or "OFF".*
keys
keys: Set the destination port number of OUT1B (1 to 65535)
keys: Set the password of OUT1B (30 to 39, 41 to 5A, 61 to 7A of
ASCII codes)
keys Moves the cursor to the next character (Up to 32 characters).
keys
keys: OUT4B
Displays the message for 1 second before automatically returning to
the previous screen.
*1 *2 *3
*4
Operation mode (TRANSMITTER
*1
2
3
*
*
.
*4
operation mode (TRANSMITTER
144
MSD-804FD User's Guide
*5
).
*1
1
*1,*2
5
*
).
*1 *2
.
Advertisement
Table of Contents
