Vertical Start Position [V Start] - IDK msd-804fd User Manual

7.6.4

Vertical start position [V START]

･Vertical start position: 10 to 2048 (Equal or less than [Total vertical lines-vertical display period])
[Default]: Depends on input signals
Video signals
Vertical
synchronizing signal
The settable range depends on the total number of lines of input signals (the MSD counts automatically) and
"7.6.5 Vertical display period [V DISPLAY]". If the set value is [Total number of vertical lines > Vertical
displayed period > Vertical start position] and the set value of vertical start position exceeds the limit value by
changing the vertical display period, the vertical start position is set to the limit value automatically.
1. To set the vertical start position using menu:
MSD-804FD
↓ SET key
[FUNCTION SELECT]
INPUT TIMING
↓ SET key
[INPUT TIMING]
V START
↓ SET key
[IN1 V START]
35LINE
↓ ESC key: Returns to the previous screen
Note:
You can set the vertical start position only if there is an input signal. If no signal is
input, you cannot set the position, and the message shown right is displayed.
2. To set the vertical start position using commands:
@SVS: Set vertical start position
@GVS: Get vertical start position
Total vertical lines
Vertical display period
Vertical start position = Lines between the start of vertical synchronous signal and start of video signals
[Fig. 7.22] Vertical start position
Top
▲▼keys: Select "INPUT TIMING".
▲▼keys: Select "V START".
▲▼keys: Set the vertical start position.
◄►keys: Select the desired input (IN1 to IN8).
For each input port/input signal
92
MSD-804FD User's Guide
[IN1 V START]
NOT AVAILABLE NOW