Electronic Components
-Control Unit Replacement
All SRS wire harnesses and connectors
are colored yellow. Do not use electrical test equipment
on these circuits.
CAUTION: Be careful not to damage the SRS wire
harnesses when servicing the control unit.
1.
Disconnect the connectors from the control units.
SECURITY
CONTROL UNIT
2. Remove the four control unit bracket bolts, then
remove the bracket with the control units.
19-70
3.
ANTI-LOCK BRAKE
SYSTEM
CONTROL
UNIT
CONTROL
UNIT
4.
Remove the control unit from the bracket.
Install the new control unit in the reverse order of
removal.
NOTE: Check the anti-lock brake system indicator
light function by turning the ignition switch on.
ANTI-LOCK BRAKE
SYSTEM
CONTROL