[Cm62] Tenants For Each Att Group - NEC UNIVERGE SV8300 Command Manual

COMMAND CODE TITLE:
62
FUNCTION:
This command is used to assign which tenants are handled by each DESKCON Group.
[8300R2]
PRECAUTION:
(1) This command requires a reset by CM60 Y=90>0: 0 after data setting.
(2) Multiple tenants can be assigned to one ATT Group, but one tenant cannot be assigned to more
than one ATT Group.
ASSIGNMENT PROCEDURE:
ST + 62Y + DE
DATA TABLE:
Y
No. MEANING
0 ATT Group 0
1 ATT Group 1
2 ATT Group 2
3 ATT Group 3
TENANTS FOR EACH ATT GROUP
TENANT NUMBER
+
(2 digits)
TENANT
No. MEANING
00 Tenant 00
63 Tenant 63
DATA
+ DE + + EXE
(1 digit)
SETTING DATA
No.
0 To handle
1 Not handled
3-352
RELATED
COMMAND
MEANING
CM60 Y=00
NWA-033623-001 Rev.3.0
NOVEMBER/12/2008
CM62
: Default
91ch3005.fm