NEC UNIVERGE SV8300 Command Manual page 531

COMMAND CODE TITLE:
AE
Y MEANING
19 Handover
[For PHS]
[8300R2]
BLADE RESET
22 Destination SYS-ID
for priority synchro-
nization NOTE 5
42 Network ID for
Roaming Service
[For PCS]
[8300R2]
NOTE 6
NOTE 1: Be sure to set from the 1st digit to last digit (10 digits). Last 4 digits must be set as "0000".
NOTE 2: After changing this data, download the PS operation data by CM1D Y=20.
NOTE 3: PS operation data must be downloaded every time the control carrier number is changed.
NOTE 4: Be sure to set the 2nd data to 00 for BS31/BS41 handover.
NOTE 5: This data is set when synchronizing with CS from which SYS-ID is different (CS of the other
company is included).
NOTE 6: All CS/ZT must be reset after this data setting.
CS/ZT OPERATION DATA ASSIGNMENT
1ST DATA
DATA
00 Channel slot for
handover (for BS31/
BS41)
01 Delay correction
when the other type of
CS is used with BS31/
BS41
00-09 Wireless Block num-
ber
00 Network ID assign-
ment
MEANING
NONE
NOTE 4
NONE
XXXXXXXXX
NONE
00000-65534
NONE
3-482
SETTING DATA
DATA MEANING
00 Channel Slot
No. 00
No data
03 BS31 and BS21 are
used
Only BS31/BS41 is
used
Destination SYS-ID
for clock synchroni-
zation
(Maximum 9digits,
Decimal)
No data
Network ID
No data
NWA-033623-001 Rev.3.0
NOVEMBER/12/2008
CMAE
: Default
91ch3007.fm