NEC UNIVERGE SV8300 Command Manual page 398

COMMAND CODE TITLE:
60
Y
No. MEANING
35 Tenant number for DESKCON
[8300R2]
36 Ringing signal patterns of
DESKCON
[8300R2]
51 DESKCON number for PS-display
[8300R2]
90 DESKCON Soft Reset
[8300R2]
NOTE 1: Master ATT must be assigned to a single Attendant Console within the ATT Group.
NOTE 2: A reset by CM60 Y=90>0: 0 is required after this data setting.
NOTE 3: These data are effective for Day/Night Mode Change key on DESKCON. NT switch is effec-
tive only on the Master ATT assigned by CM60 Y=01.
NOTE 4: After this data setting, a reset of DT300/DT700 Series/D
NOTE 5: The second data can only be set to 0.
NOTE 6: Reset DESKCON soft after confirming all the DESKCON are not used.
ATT TENANT GROUP, FUNCTIONS
DATA
00
63
NONE
NOTE 2
XX...XX
NONE
NOTE 5, NOTE 6
GROUP NUMBER
MEANING
Tenant No. 00
Tenant No. 63
No data
0 0.5ON-0.5OFF
1 1sON-1sOFF
2 2sON-4sOFF
3 1sON-2sOFF
X DESKCON No. for PS-display
(1 digit-8 digits)
No data
0 To reset
1 Already reset
term
3-349
RELATED
COMMAND
CM20>800
CM60 Y=90
CM60 Y=00, 01,
02, 04, 06, 16, 17,
23, 27, 30, 51
CM62
Series is required.
NWA-033623-001 Rev.3.0
NOVEMBER/12/2008
CM60
: Default
91ch3005.fm