NEC UNIVERGE SV8300 Command Manual page 129

COMMAND CODE TITLE:
0B
Y
No. MEANING
0XX 0 : Maintenance Port
XX: Unit No. (01-50)
LAN DATA ASSIGNMENT
1ST DATA
DATA MEANING
120 IP Address for the desti-
nation of trap
(First place)
121 IP Address for the desti-
nation of trap
(Second place)
122 IP Address for the desti-
nation of trap
(Third place)
123 IP Address for the desti-
nation of trap
(Fourth place)
NOTE:
The following conditions are applied to CM0B Y=0XX/1XX>120-123.
- Only Unit No. 01 can be set by this data.
- This data cannot be entered by CAT when using 8300R1 software.
- When setting the IP address by this data, a period (.) must be entered between
the numbers (example: 255.255.255.254).
124 IP Address for the SNMP
manager
(First place)
125 IP Address for the SNMP
manager
(Second place)
126 IP Address for the SNMP
manager
(Third place)
NOTE:
The following conditions are applied to CM0B Y=0XX/1XX>124-127.
- Only Unit No. 01 can be set by this data.
- This data cannot be entered by CAT when using 8300R1 software.
- When setting the IP address by this data, a period (.) must be entered between
the numbers (example: 255.255.255.254).
- If no IP address for the SNMP manager (first place to fourth place) are set, the
access to the system is allowed to all SNMP managers.
2ND DATA
DATA
XXX.XX IP Address for the destina-
...X tion of trap
NOTE (Maximum 15 digits)
XXX.XXX.XXX.XXX=
0.0.0.1-255.255.255.254
NONE No data
NOTE
NOTE
NOTE
XXX.XX IP Address for the SNMP
...X manager
NOTE (Maximum 15 digits)
XXX.XXX.XXX.XXX=
0.0.0.1-255.255.255.254
NONE No data
NOTE
NOTE
3-80
RESET
: Default
RELATED
COMMAND
MEANING
Continued on next page
NWA-033623-001 Rev.3.0
NOVEMBER/12/2008
CM0B
91ch3001.fm