[Cm01] System Data Memory Partial Clear - NEC UNIVERGE SV8300 Command Manual

COMMAND CODE TITLE:
01
FUNCTION:
This command is used to clear the data for specific features.
PRECAUTION:
This command can only be used in off-line mode.
ASSIGNMENT PROCEDURE:
+ 01 + DE +
ST
DATA TABLE:
CLEAR DESIGNATION
08
20
2A
76
85
8A
770
SYSTEM DATA MEMORY PARTIAL CLEAR
CLEAR DESIGNATION
(2/3 digits)
SYSTEM DATA TO BE CLEARED
CM08: Basic Service
CM20: Numbering Plan/Single Digit Feature Access Code
CM21: Single Digit Access Code
CM22: Route Advance
CM23: Tenant Development
CM25: Kind of Special Terminal Development
CM29: Numbering Plan Tenant Group
CM2A: ID Code Assignment with CPU/Development Block Number
Assignment for Each Calling Party Number
CM76: Digit Conversion on DID Call
CM85: Maximum Number of Sending Digits
CM8A: LCR/Toll Restriction Development Table
CM77: Station Name Assignment
+ + CCC +
DE EXE
3-5
CM01
OFF LINE
REMARKS
To clear only for the
station memory of
CM77 Y=0, 1, 4, 5
NWA-033623-001 Rev.3.0
91ch3001.fm
JULY/18/2008