NEC UNIVERGE SV8300 Command Manual page 89

Hide thumbs Also See for UNIVERGE SV8300:

Table of Contents

COMMAND CODE TITLE:

Dialing of a Single Digit Feature Access Code, while the calling

station hears busy tone

To activate Single Digit Feature Access Code, set CM08>050, 051, 069 and 148 to "1".

If the * button on a DTMF telephone is pressed while hearing busy tone, it is

regarded as a Switch Hook Flash

If the # button on a DTMF telephone is pressed while hearing busy tone, it is

regarded as a Switch Hook Flash

When a station user has dialed any one digit while hearing busy tone

When a station user, upon encountering the called station busy, has dialed

the same last digit again hearing busy tone

The table below shows the available features and its access codes for Single Digit Feature Access Code, while

the calling station hears busy tone.

Call Back/Outgoing Trunk Queueing

(Trunk Queuing-Outgoing)

Executive Right of Way

(Executive Override)

Station Camp-On

Call Waiting

Message Reminder/Message Waiting

(7 + Last one digit)

Message Waiting Record

While the Multiline Terminal or DP telephone is holding the other call, this feature is not available.

While the DTMF telephone is holding the other call, this feature is not available.

BASIC SERVICES

BASIC SERVICE

Not available

Calling Station Kind

SETTING DATA

Continued on next page

NWA-033623-001 Rev.3.0

Show Quick Links

Table of Contents