NEC UNIVERGE SV8300 Command Manual page 547

COMMAND CODE TITLE:
B4
DATA TABLE:
Y
No. MEANING
00 Number of times that
traffic exceeded the
limit bandwidth
01 Number of times that
traffic exceeded the
warning bandwidth
02 Maximum bandwidth
that are used
03 Bandwidth that are
used now
NOTE 1:
The PEG count of 0-49999 can be stored to the system. When the number exceeds 49999, the
system starts counting from 0.
NOTE 2:
The bandwidth of 0-1677721 Kbps can be displayed on PCPro/CAT. Even if the bandwidth
exceeds 1677721, the PCPro/CAT displays the bandwidth 1677721 Kbps.
PEG COUNT OF IP NETWORK
1ST DATA
DATA MEANING
XXZZ XX: Location
number of
group to
send side
(00-63)
ZZ : Location
number of
group to
receive side
(00-63)
9999 All clear
2ND DATA
DATA
00000 Counter data display
49999
CCC Clear
00000 Counter data display
49999
CCC Clear
0000000 Maximum bandwidth
display (Kbps)
1677721
CCC Clear
0000000 Bandwidth display
(Kbps)
1677721
CCC Clear
3-498
RELATED
COMMAND
MEANING
CM67
NOTE 1
NOTE 1
NOTE 2
NOTE 2
NWA-033623-001 Rev.3.0
CMB4
91ch3007.fm