NEC UNIVERGE SV8300 Command Manual page 197

COMMAND CODE TITLE:
15
Service Restriction Class A
No.
140 Pad Lock Set/Reset from station
141 Station Authorization Code Set/Change
143 IP Station Logout operation
146 Sending Switch Hook Flash for Adjunct Analog System
147 Voice Mail Private Password-CCIS
NOTE 1:
The first data must be the preassigned VMS Service Restriction Class which is sent from the office via
CCIS.
NOTE 2:
This command is not effective for the Service Restriction Class of own office.
148 PS Location Indication
[8300R2]
149 PS Location Indication on Multiline Terminal display
[8300R2]
204 Call Forwarding-PS Out of Cell (Zone) for PS Soft Key
[8300R2]
205 Selection of Off Hook Ring Volume
NOTE: The following operations are required when this data is changed.
Multiline Terminal : Disconnect the Multiline Terminal cable and connect the Multiline Terminal cable
IP Station
SERVICE RESTRICTION CLASS A
Y
MEANING
again/Unplug the DLC blade and plug the DLC blade again.
: Logout the IP Station and login the IP Station again.
SERVICE
REST.
CLASS (A)
00
15
00
15
3-148
: Default
SETTING DATA
DATA MEANING
0 Allow
1 Restricted
0 Restricted
1 Allow
0 Allow
1 Restricted
0 Allow
1 Restricted
0 Allow
1 Restricted
0 Restricted
1 Allow
0 Allow
1 Restricted
0 Destination setting of
each PS
1 Destination setting of
each tenant
0 Off Hook Ring
Volume 2
(As per CM42>75)
1 Off Hook Ring
Volume 1
(As per CM42>74)
Continued on next page
NWA-033623-001 Rev.3.0
91ch3002.fm
NOVEMBER/12/2008
CM15