NEC UNIVERGE SV8300 Command Manual page 190

COMMAND CODE TITLE:
13
No.
63 Accommodation of D
ADP
NOTE 1: Set this data only for a Base Port of DLC blade.
NOTE 2: When the second data is set to "0", D
term
D
64 Whether the station is for the outgoing
call of Conference
[8300R2]
66 DT300/700 Display Enhancement for
Universal Design
[8300R2]
NOTE: The data setting is valid by resetting DT300/700 Series.
67 Accommodation of DTH-4R/DTL-8R
[North America Only]
68 The DTMF signal is transmitted from
term
DT700 to D
term
number of D
NOTE: As per CM13 Y=24 and CM13 Y=59 (Refer to CM13 Y=24 and CM13 Y=59).
STATION CLASS-2
Y
MEANING
term
70/PGD(2)-U10
BLADE RESET
75 under the same DLC blade (DT300 Series can be accommodated with D
IP (Set it to the station
IP)
SETTING DATA
DATA
0 To accommodate
1 Not accommodated
term
70/PGD(2)-U10 ADP cannot be accommodated with
0 Station for the outgoing call
1 Ordinary station
0 Background : Black, Letters : White
1 Background : White, Letters : Black
0 To accommodate
1 Not accommodated
0 To send
1 Not sent
3-141
: Default
MEANING
term
85).
NWA-033623-001 Rev.3.0
91ch3002.fm
NOVEMBER/12/2008
CM13