Unit Configuration - NEC UNIVERGE SV8300 Command Manual

COMMAND CODE TITLE:
10
About Unit number, Slot number and Circuit number
The following describes the Unit number, Slot number and Circuit number that are set by CM05
and CM10.
(1) Unit Number
The Unit means the Main Unit that consists of CPU chassis (1U) and Line/Trunk chassis (2U).
Up to a maximum of 50 Units can be installed, and each Unit is managed by the Unit number.
The Unit numbers 01-04 are used for the Stand-alone system or the Main Unit of the Remote UNIT
over IP system. The Unit numbers 05-50 are used for the Remote Unit of the Remote UNIT over
IP system.
The following shows the Unit configuration and the outline of the Units.
STATION NUMBER, TRUNK NUMBER, BLADE NUMBER

Unit Configuration

Line/Trunk chassis (2U)
CPU chassis (1U)
3-109
CM10
Continued on next page
NWA-033623-001 Rev.3.0
91ch3002.fm