NEC UNIVERGE SV8300 Command Manual page 304

COMMAND CODE TITLE:
36
DATA TABLE:
Y
No. MEANING
0 Setting of restric-
tion data for tan-
dem connection
1 Setting of PAD
data for tandem
connection
NOTE: This command is effective for the following trunks.
- LDT/ODT/BRT/DTI/CCT/SIP/IPT (P2P CCIS)
RESTRICTION DATA/PAD DATA FOR TANDEM CONNECTION
INCOMING OUTGOING
TRUNK TRUNK
ROUTE ROUTE
00 00
63 63
SETTING DATA
0 Allow
1 Restricted
aa bb aa : PAD data from an incoming
trunk route to an outgoing
trunk route (01-31)
bb: PAD data from an outgoing
trunk route to an incoming
trunk route (01-31)
01: -15 dB
15: -1 dB
(1 dB increment)
16: 0 dB
17: +1 dB
31: +15 dB
(1 dB increment)
NONE 0 dB/0 dB
+: Gain
- : Loss
3-255
CM36
: Default
RELATED
COMMAND
CM35 Y=005
CM35 Y=005
Continued to next page.
NWA-033623-001 Rev.3.0
91ch3003.fm