NEC UNIVERGE SV8300 Command Manual page 82

COMMAND CODE TITLE:
08
117 While the station (STA-A) is talking with another station (STA-
B) after consultation hold with a C.O. call, when STA-B has
hung up
119 Toll Diversion
When the station dials restricted area code after C.O. trunk
access code
120 Name Display (Guest Name Display)
Time to go back to Date and Time display after the call
answered
121 Name Display (Guest Name Display) after the call answered
123 When a station has originated a call to C.O. line via the trunk
route assigned to 1 by CM35 Y=004, and answer signal has not
been detected within the preprogrammed time after dialing, a
pseudo-answer signal is generated
124 Multiple connections of Voice Response System on Announce-
ment Service
125 Unsupervised transfer
After holding an incoming C.O. call, an attendant dials a sta-
tion. After connection with the attendant, if the called station
goes on-hook, the attendant returns to the held call.
[8300R2]
126 Timing of Call Forwarding-No Answer for trunk incoming call
130 Exclusive Hold on Multiline Terminal
BASIC SERVICES
BASIC SERVICE
See
0 STA-A returns to the call with C.O.
line
1 STA-A hears ROT
0 Diversion to attendant "ICPT"
1 Station receives ROT
0 10 seconds later
1 6 seconds later
0 Until call finished
1 As per CM08>120
0 To send
1 Not sent
[Australia Only]
0 Not sent
CM41 Y=0>03
1 To send
[Other than Australia]
0 Available
1 Not available (Single connection)
0 Return to held call
1 Attendant hears ROT
0 As per timing for internal call or an
assisted call
(As per CM41 Y=0>15/CM41
Y=0>101/CME6 Y=08)
1 As per timing for trunk incoming call
(As per CM41 Y=0>01/CM41
Y=0>100/CME6 Y=07)
0 Not available
1 Available
3-33
: Default
SETTING DATA
Continued on next page
NWA-033623-001 Rev.3.0
91ch3001.fm
NOVEMBER/12/2008
CM08