NEC UNIVERGE SV8300 Command Manual page 182

COMMAND CODE TITLE:
12
Y
No. MEANING
71 Assign the PGD(2)-U10
station number to control
the relay specified by an
intervening Virtual Line
Station
[8300R2]
NOTE: This data is not available when setting the first data that is not a virtual station number.
90 Registered IP Station MAC
Address display/clear
NOTE 1:
If you clear the registered IP Station MAC Address while the system is operating, IP Station is reset
even though it is connected.
NOTE 2:
MAC Address automatic registration in Fixed Connection Mode should be executed during the terminal
logging in.
NOTE 3: A maximum of 256 MAC Addresses can be registered in Fixed Connection Mode.
NOTE 4: This command has to be registered after assigning CM15 Y=480 2nd data "1" and CM2B Y=00 in
Fixed Connection Mode. If you do not do that, "DATA ERROR" is displayed.
NOTE 5: Execute the system data backup by CMEC Y=6>0: 0 after this command registered. When changing
this data of terminals accommodated in a Remote Unit, execute the system data copy by CMEC Y=8 to
the Remote Unit.
NOTE 6: Confirm the registered MAC Addresses by CM12 Y=92.
STATION CLASS-1
DATA
X PGD(2)-U10 Station number
XXXX
XXXX
NONE No data
X.....XXX MAC Address display
(12 digits)
0 MAC Address automatic registration in Fixed Con-
nection Mode
CCC Clear
NONE No data
SETTING DATA
MEANING
3-133
CM12
: Default
RELATED
COMMAND
Continued on next page
NWA-033623-001 Rev.3.0
91ch3002.fm
NOVEMBER/12/2008