NEC UNIVERGE SV8300 Command Manual page 228

COMMAND CODE TITLE:
1D
Y
No. MEANING
90 A combination of PS station
number that converted from
NEAX 2000 IPS and
SV8300 PS station number
NOTE 4: This command is used when the system data of NEAX 2000 IPS is converted by System Data
Convertor of PCPro.
NOTE 5: PS station numbers are controlled by the following two numbers;
- The incoming/outgoing number of PS is controlled by the first data (PS Statio No.) of this
command as well as NEAX 2000 IPS.
- A PS station number between the CS/ZT-PS is controlled by the PS station number as-
signed by CM1C of NEAX 2000 IPS.
NOTE 6: If a PS station number is cleared by this command, A PS station number assigned by CM10
Y=04 is assigned to the PS (a PS number is controlled by one number).
It is recommended to clear a PS station number by this command and control the PS by one
station number.
NOTE 7: This data setting is not required when assigning a PS station number by SV8300.
PS-ID ASSIGNMENT/PS OPERATION DATA DOWNLOAD
PS STATION No.
X-XXXXXXXX
(Primary Subline
PS Station No.)
NOTE 4
NOTE 5
NOTE 6
NOTE 7
SETTING DATA
DATA
XX...XX PS station No.
(assigned by CM1C from
NEAX 2000 IPS)
CCC Clear
NONE No data
3-179
: Default
RELATED
COMMAND
MEANING
CM10 Y=04
NWA-033623-001 Rev.3.0
NOVEMBER/12/2008
CM1D
91ch3002.fm