NEC UNIVERGE SV8300 Command Manual page 66

COMMAND CODE
04
Y
No. MEANING
01 Setting of services
TITLE:
DISPLAY LANGUAGE FOR MULTILINE TERMINAL/DESKCON LCD, DEFAULT SETTING
PATTERNS FOR MULTILINE TERMINAL, KIND OF TONE FOR IP STATION/TDM, INQUIRY
NO. IN PASSWORD LOCK STATE FOR DT700 SERIES, SINGLE LINE TELEPHONE
RINGING SIGNAL FOR STATION-TO-STATION CONNECTION, SINGLE LINE TELEPHONE
RINGING SIGNAL FROM A TRUNK, SPECIAL RINGING SIGNAL FOR SINGLE LINE
TELEPHONE RING, SETTING OF SERVICES, A-LAW/µ-LAW SETTING FOR EACH UNIT
1ST DATA
DATA MEANING
01 Connection port for MCI
[8300R1]
MCI
[8300R2 or later]
02 Purpose of Caller ID
sender
[North America/EU]
03 Handling of CPU call
information
NOTE: This command is not effective for the SMDR and Individual Station Record.
05 Destination to send a call
information
06 Destination to send a call
information which
received from Local
Office
2ND DATA
DATA
0 RS1 on CPU
1 RS2 on CPU
7 No data
0 Available
7 Not available
0 Caller ID-Station
7 No data
2 Call Charge Printout/
Display and Immediate
Printout Call Record
7 Not output
0 SMDR terminal via
LAN port
1 PMS via LAN port
7 SMDR terminal via RS
port
0 SMDR terminal via
LAN port
1 RS port (To output to
RS1/RS2 port set by
CM40>00)
3 Not output
3-17
: Default
RELATED
COMMAND
MEANING
CM08>507
CM10/
CM50
Y=00>8
CM04
Y=01>03
Continued on next page
NWA-033623-001 Rev.3.0
91ch3001.fm
NOVEMBER/12/2008
CM04