NEC UNIVERGE SV8300 Command Manual page 597

COMMAND CODE TITLE:
EE
Y
No. MEANING
2 Subnet Mask for
Conference blade/
In-Skin UMS blade
BLADE RESET
NOTE 1: This data cannot be entered by CAT when using 8300R1 software.
NOTE 2: When setting the Subnet Mask by this data, a period (.) must be entered between the numbers
(example: 255.255.255.252).
3 Default Gateway for
Conference blade/
In-Skin UMS blade
BLADE RESET
NOTE 1:
This data cannot be entered by CAT when using 8300R1 software.
NOTE 2:
When setting the Default Gateway by this data, a period (.) must be entered between the numbers
(example: 255.255.255.254).
APPLICATION BLADE DATA ASSIGNMENT
1ST DATA
DATA MEANING
XXYY XX: Unit number (01-50)
YY: Slot number (01-18)
XXYY XX: Unit number (01-50)
YY: Slot number (01-18)
DATA
XXX.XX
...X
NONE
XXX.XX
...X
NONE
3-548
: Default
2ND DATA
MEANING
Subnet Mask
(Maximum 15 digits)
XXX.XXX.XXX.XXX=
255.0.0.0-255.255.255.252
255.255.255.0
Default Gateway
(Maximum 15 digits)
XXX.XXX.XXX.XXX=
0.0.0.1-255.255.255.254
0.0.0.0
NWA-033623-001 Rev.3.0
NOVEMBER/12/2008
CMEE
91ch3008.fm