NEC UNIVERGE SV8300 Command Manual page 94

COMMAND CODE TITLE:
08
268 Call termination to My Line while the station user makes a call
with a Sub line or trunk line on Multiline Terminal
269 Busy indication on BLF of large type DESKCON, DSS Con-
sole or Multiline Terminal by station base or extension base
270 Voice Call when calling Multiline Terminal set to Voice First
from single line telephone or Multiline Terminal without LCD
271 Voice Call when calling Multiline Terminal set to Voice First
from Attendant Console
[8300R2]
274 Line lockout indication on DSS Console
281 Maid Identification number used for Maid Status
282 Message "RING ON OK" is printed out when wake up call
starts
283 Message "STATION BUSY" is printed out when the station is
busy on Wake Up call
284 Message "CONNECTION BLOCK" is printed out when Wake
Up call is unsuccessful
285 Message "RESTRICTION" is printed out when Wake Up call is
unsuccessful
286 Message "STATION ANSWER" is printed out when the sta-
tion answer Wake Up call
287 Message "STATION NO ANSWER" is printed out when the
station does not answer Wake Up call
NOTE 1: When CM08>268=0 (restricted), set 0 (station base) by CM08>269.
NOTE 2: CM08>281, 282, 283, 284, 285, 286, 287 are required for Hotel printer.
BASIC SERVICES
BASIC SERVICE
0 Restricted
NOTE 1 1 Allowed
0 Station base
1 Extension base
NOTE 1
0 Not provided (Busy Tone)
1 To provide
0 Not provided (Busy Tone)
1 To provide
0 Available
1 Not available
NOTE 2 0 Available
1 Not available
0 Not printed
NOTE 2 1 To print
0 Not printed
NOTE 2 1 To print
0 Not printed
NOTE 2 1 To print
0 Not printed
NOTE 2 1 To print
0 Not printed
NOTE 2 1 To print
0 Not printed
NOTE 2 1 To print
3-45
: Default
SETTING DATA
Continued on next page
NWA-033623-001 Rev.3.0
91ch3001.fm
NOVEMBER/12/2008
CM08