NEC UNIVERGE SV8300 Command Manual page 441

COMMAND CODE TITLE:
76
Y
No. MEANING
33 Whether the call
terminating
method is speci-
fied for DID
incoming call with
no CLI in Day
Mode
NOTE:
Assign the call terminating method by CM76 Y=34 when this command is set to 0/1.
34 Specification of
the call terminat-
ing method for
DID incoming call
with no CLI in
Day Mode
35 Whether the call
terminating
method is speci-
fied for DID
incoming call with
no CLI in Night
Mode/Mode A/
Mode B
NOTE: Assign the call terminating method by CM76 Y=36 when this command is set to 0/1.
DIGIT CONVERSION ON DID CALL
1ST DATA
DATA
000-999:
Number Conver-
sion Block No.
assigned by
CM76 Y=00/90
000-999:
Number Conver-
sion Block No.
assigned by
CM76 Y=00/90
2ND DATA
MEANING
0 Specified when reason of the incom-
ing calls with no CLI is "Privacy"
1 Specified for all incoming call with
no CLI
3 Not specified
0 To transfer to the VRS/another
station/Attendant Console (assigned
by CM51 Y=33)
1 To reject the call termination
2 To terminate Multiline Terminal with
lamp indication/ringer tone/ringer
pattern (assigned by CM76 Y=37, 38,
39)
3 To terminate as usual
0 Specified when reason of the incom-
ing call with no CLI is "Privacy"
1 Specified for all incoming call with
no CLI
3 Not specified
3-392
CM76
: Default
REMARKS
CM76 Y=34
CM51 Y=33
CM76 Y=33,
37, 38, 39
CM76 Y=36
Continued on next page
NWA-033623-001 Rev.3.0
91ch3005.fm
JULY/18/2008