[Cm85] Maximum Number Of Sending Digits - NEC UNIVERGE SV8300 Command Manual

COMMAND CODE TITLE:
85
FUNCTION:
This command is used to define the maximum number of digits which can be dialed, after C.O. access,
given a specific first digit.
PRECAUTION:
This command is effective when CM35 Y=076 is assigned.
ASSIGNMENT PROCEDURE:
+ 85Y +
ST DE
DATA TABLE:
Y
No. MEANING
0 Area Code
Development
7 Pattern No. 0-7
0-4: For Toll Restric-
tion
5-7: For LCR
See
CM35 Y=076
CM8A Y=4000-
4004, 4005-4007
NOTE 1:
If the office code is not assigned with this command, the maximum number of sending digits
is automatically set to "24".
NOTE 2:
Allows the development of a secondary table.
MAXIMUM NUMBER OF SENDING DIGITS
AREA/OFFICE CODE
+
(1-8 digits)
AREA/OFFICE CODE
X Area/Office Code,
or its part
X...X X: 0-9, A (*) B (#)
(Maxi-
mum
8 digits)
MAXIMUM NUMBER
OF SENDING DIGITS
+ +
DE
(2 digits)
MAXIMUM NUMBER OF SENDING DIGITS
00 Not used
01 1 digit
24 24 digits
79 79 digits
80 Go back to Area Code Development
Pattern No. 0 for Toll Restriction
(CM85 Y=0)
84 Go back to Area Code Development
Pattern No. 4 for Toll Restriction
(CM85 Y=4)
85 Go back to Area Code Development Pat-
tern No. 5 for LCR
(CM85 Y=5)
87 Go back to Area Code Development Pat-
tern No. 7 for LCR
(CM85 Y=7)
3-408
CM85
+
EXE
: Default
NOTE 1
NOTE 2
NOTE 2
NOTE 2
NOTE 2
Continued on next page
NWA-033623-001 Rev.3.0
91ch3005.fm
JULY/18/2008