NEC UNIVERGE SV8300 Command Manual page 327

COMMAND CODE TITLE:
41
1ST
Y MEANING
DATA
Conference (built-in
CPU) forced release
141
timer
[8300R2]
Interval Time of
TDM-Blade Keep
0
alive
[8300R2]
144
SYSTEM TIMER DATA
DEFAULT
NONE 01 02 03 .........................................................24
7 hours 1
NOTE:
NONE 01 02 03 .........................................................10
12 4
seconds
NOTE:
When no signal return from TDM blade during four inter-
vals of transmission cycle,the system judges that the blade
is locked up and the blade reset is executed.
When this data is set to default, the blade reset is executed
about 48 (twelve by four) seconds after locked up.
2ND DATA
TIMER
2 3 ..........................................................24
If this data set to "00", Forced release is not
provided hours.
8 12 .........................................................40
3-278
CM41
INCREMENT
UNIT
1 hour
4 seconds
NWA-033623-001 Rev.3.0
91ch3004.fm
NOVEMBER/12/2008