NEC UNIVERGE SV8300 Command Manual page 137

COMMAND CODE TITLE:
0B
Y
No. MEANING
1XX 1 : VOIP Port
XX: Unit No. (01-50)
LAN DATA ASSIGNMENT
1ST DATA
DATA MEANING
100 SNMP port
NOTE: Only Unit No. 01 can be set by this data.
101 Community Name
"admin"
NOTE 1: Only Unit No. 01 can be set by this data.
NOTE 2: Restrict the use of community name "admin" (set the community name
to "public") except the system construction.
102 Trap is sent to the SNMP
manager
103 Definition of the IP
address for the SNMP
manager
104 Kind of Trap message
(Specific, Object ID)
sent to SNMP manager
[Australia Only]
110 Community name
111 System information
(sysDescr)
NOTE:
Only Unit No. 01 can be set by this data.
2ND DATA
DATA
0 Open SNMP port
1 Not open SNMP port
0 Allow (admin)
1 Restrict (public)
0 To send
NOTE 1 Not sent
0 Subnet Mask of the IP
address for the SNMP
NOTE manager (First place)
1 IP address for the SNMP
manager (Fourth place)
0 Variable Trap message by
external alarm kind (MJ/
MN/--)
1 Fixed Trap message
NOTE
XX...X Character
NOTE (Maximum 25 characters)
NONE No data
XX...X Character
NOTE (Maximum 128 characters)
NONE No data
3-88
RESET
: Default
RELATED
COMMAND
MEANING
Continued on next page
NWA-033623-001 Rev.3.0
NOVEMBER/12/2008
CM0B
91ch3001.fm