NEC UNIVERGE SV8300 Command Manual page 121

COMMAND CODE TITLE:
08
888 Setting of number of sending digits for printer
[8300R2]
890 Whether to give ACC/AUTH for Station Individual Call
Record Print
[8300R2]
893 Setting of decimals for Call charge
[8300R2]
894 Replaying a Wake up call in English after replaying the first
Wake up call
[8300R2]
895 Printout of language information from Hotel Printer, when set
language indicated number from Hotel Console
[8300R2]
898 Assign the relay when using a Paging on Call Forwarding
[8300R2]
NOTE: This data is effective only when the intervening station is a Virtual Line Station.
BASIC SERVICES
BASIC SERVICE
0 Printer for 80 digits
1 Printer for 20 digits
0 To give
1 Not given
0 Raise decimals to the next whole
number
1 Not raised
0 Available
1 Not available
0 Not available
1 Available
0 To operate the relay specified by the
intervening station
1 To operate the relay of PGD(2)-U10
Station (to use a Paging)
3-72
: Default
SETTING DATA
Continued on next page
NWA-033623-001 Rev.3.0
91ch3001.fm
NOVEMBER/12/2008
CM08