[Cmf6] Online Mp-Fp Command Output - NEC UNIVERGE SV8300 Command Manual

COMMAND CODE TITLE:
F6
FUNCTION:
This command is used only for maintenance.
DO NOT USE this command without the assistance of a NEC engineer.
ASSIGNMENT PROCEDURE:
ST + F6Y + DE
DATA TABLE:
Y
No. MEANING
2 MP-FP command out-
put setting
ONLINE MP-FP COMMAND OUTPUT
1ST DATA
+ + DE +
(2 digits)
1ST DATA
DATA
00 Command Code
01 Unit Number
02 Slot number
03 IN/OUT command setting
2ND DATA
+ EXE
(1-8 digits)
MEANING DATA
NONE
000
049
NONE
XXX
NONE
CCC
3-555
2ND DATA
MEANING
00 Command code to be output
FE
Output all command codes
Unit number to be output
Output all Unit numbers
Slot number to be output
000-017: TDM terminal
024-026: SIP trunk
032-047: IPT (P2P CCIS)
128-191: IP Station
Output all Slot numbers
0 Display both IN command/
OUT command
1 Display only OUT command
2 Display only IN command
3 Not displayed
Clear all the data of CMF6
Y=2
Continued on next page
NWA-033623-001 Rev.3.0
NOVEMBER/12/2008
CMF6
: Default
91ch3008.fm