NEC UNIVERGE SV8300 Command Manual page 189

COMMAND CODE TITLE:
13
No.
55 Provide Calling Number Display for the
stations of SLT/sub line of Multiline Ter-
minal/Virtual line/Virtual station for PS
that are accommodated to the Multiline
Terminal multiline as a subline
NOTE: When terminating the call to the stations of SLT/subline of Multiline Terminal/Virtual line/Virtual sta-
tion for PS, the calling number is displayed on the LCD of the Multiline Terminal assigned by CM57
Y=30.
56 Call termination to Attendant Position/
station Night mode is set
57 Voice Mail Live Record-CCIS
NOTE:
Set the second data to "0" for all the VMS ports performing Voice Mail Live Record-CCIS.
58 Operation at pressing another Line/Trunk
key while talking on the
station/trunk using Trunk-Direct Appear-
ances
59 Kind of VMS
NOTE:
When sending the DTMF tone while a call between IP Multiline Terminal and DT700 Series is estab-
lished, the second data of CM13 Y=59 and CM13 Y=24 must be set to "0" for IP Multiline
Terminal.
60 Storage of the call record when answer-
ing a trunk call
61 Storage of the call record when handling
of unanswered a trunk call
STATION CLASS-2
Y
MEANING
SETTING DATA
DATA
0 To provide
1 Not provided
0 Restricted
1 Allowed
0 To provide
1 Not provided
0 Hold the call and seize the Line/Trunk key
1 Disconnect the call and seize the Line/Trunk key
0 Not used
1 In-Skin UMS
0 To store
1 Not stored
0 To store
1 Not stored
3-140
: Default
MEANING
Continued on next page
NWA-033623-001 Rev.3.0
91ch3002.fm
NOVEMBER/12/2008
CM13