NEC UNIVERGE SV8300 Command Manual page 103

COMMAND CODE TITLE:
08
425 Charging to the transferring station or transfer destination sta-
tion
Shown below are stations to which call is to be charged in the case of various transfer patterns.
Transfer Pattern
From
STA A
STA
DESKCON
DESKCON A
426 SMDR for incoming calls if the account code is not entered
NOTE: When CM08>426 is 1, SMDR for incoming call is not
provided even if CM13 Y=05 and CM35 Y=049 are 0
(To provide).
427 Send additional DTMF signals when called station answers, if
assigning station number and additional DTMF signals to One-
Touch key on Multiline Terminal.
428 VMS transfer from attendant, if Camp-On is set and not
answered
429 Automatic setting of OAI SMFR for Multiline Terminal Sub
line
[Cintech Jazz ACD only]
430 Send Calling Party Subaddress to ISDN network when making
call from ISDN Telephone
431 ISDN Calling Party Subaddress when making call from ISDN
Telephone
BASIC SERVICES
BASIC SERVICE
To
Split charging to STA A and
STA B
STA B
DESKCON
STA
Split charging to DESKCON
DESKCON B
A and DESKCON B
0 Charging to transferring station
1 Charging to transfer destination sta-
tion
CM08>424=0
CM08>424=1
CM08>425=1
STA
STA
DESKCON B
0 To provide
1 Not provided
0 To send
1 Not sent
0 To provide
1 Not provided
0 Available
1 Not available
0 To send (As per CM08>431)
1 Not sent
0 ISDN line station No. assigned by
CM10
1 ISDN Telephone No.
3-54
: Default
SETTING DATA
STA: station
DESKCON: Desk Console
CM08>424=0
CM08>425=0
STA B STA A
STA STA
STA STA
DESKCON A
Continued on next page
NWA-033623-001 Rev.3.0
NOVEMBER/12/2008
CM08
91ch3001.fm