NEC UNIVERGE SV8300 Command Manual page 187

COMMAND CODE TITLE:
13
No.
23 Automatic live recording
NOTE: When this feature is activated, be sure to set CM08>141, CM35 Y=22, and/or CM76 Y=13.
24 In-Skin UMS or Digital Multiline Termi-
nal
NOTE: When sending the DTMF tone while a call between IP Multiline Terminal and DT700 Series is estab-
lished, the second data of CM13 Y=24 and CM13 Y=59 must be set to "0" for IP Multiline Terminal.
25 Facility control of ISDN Calling Party
Number (CPN)
29 Designation of FAX call stations
32 Connection of Analog Port Adapter/
PGD(2)-U10 ADP
33 Port mode of Analog Port Adapter/
PGD(2)-U10 ADP
34 Designation of station connected to Dual
port mode of Analog Port Adapter/
PGD(2)-U10 ADP
35 Send or not ringing signal to the single
line telephone connected to Analog Port
Adapter
37 VMS Soft Key feature
NOTE:
Set this data to VMS station
number.
STATION CLASS-2
Y
MEANING
See PRECAUTION (4)
RESET
See PRECAUTION (4)
See PRECAUTION (4)
SETTING DATA
DATA
0 To provide
1 Not provided
See CM08>141 CM35 Y=022 CM76 Y=13
0 In-Skin UMS
1 Digital Multiline Terminal
0 To provide
1 Not provided
0 FAX call station
1 Ordinary station
0 To connect
1 Not connected
0 Dual port mode
1 Single port mode
0 Station connected to Dual port mode of Analog Port
Adapter/PGD(2)-U10 ADP
1 Station not connected to Analog Port Adapter/
PGD(2)-U10 ADP
0 Not sent ringing signal
1 Send ringing signal
0 To provide
1 Not provided
3-138
: Default
MEANING
Continued on next page
NWA-033623-001 Rev.3.0
91ch3002.fm
NOVEMBER/12/2008
CM13