NEC UNIVERGE SV8300 Command Manual page 585

COMMAND CODE TITLE:
EA
Y
No. MEANING
2 Fault information
and external alarm
(Display only)
6 Fault log/Call log
collection on VoIP
call
FAULT INFORMATION STORE/DISPLAY FUNCTIONS
1ST DATA
DATA MEANING
03B CS/ZT returned to normal con-
dition
03C LAN application returned to
normal condition
050 Traffic of IP network returned
to normal condition from limit
bandwidth excess
051 Traffic of IP network returned
to normal condition from warn-
ing bandwidth excess
052 Communication error restora-
tion between Main Unit and
Remote Unit
053 SIP trunk returned to normal
condition
101 Power failure returned to nor-
mal condition
103 DTI line returned to normal
condition
105 SV8300 Blade returned to nor-
mal condition
00 Output destination for the fault
logs/call logs
01 Display the call logs that are
collected in the CPU or clear the
logs
02 Collection method of fault logs/
call logs
2ND DATA
DATA
0 External Alarm Kind
0: Fault Memory
3 store/No output of
External Alarm
NOTE 3
1: Fault Memory
store/External
Alarm is MN
alarm
2: Fault Memory
store/External
Alarm is MJ alarm
3: No Fault Memory
store/No External
Alarm output
NOTE 4
2 RS port of CPU
NOTE 7
3 Not output
0 Logs are not
collected
1 Logs are collected
CCC Log clear
0 Not overwritten
1 Over write
3-536
: Default
RELATED
COMMAND
MEANING
CM08>450
CM42>01
CM40 Y=00
Continued on next page
NWA-033623-001 Rev.3.0
NOVEMBER/12/2008
CMEA
91ch3008.fm