NEC UNIVERGE SV8300 Command Manual page 263

COMMAND CODE TITLE:
30
Y
No. MEANING
30 Handling of busy/not available
Automated Attendant/Remote
Access to System
(DISA) destination in Day Mode
31 Handling of busy/not available
Automated Attendant/Remote
Access to System (DISA) desti-
nation in Night Mode
32 Handling of timed-out Automated
Attendant/Remote Access to Sys-
tem (DISA) call in Day Mode
NOTE 1: For Remote Access to System (DISA), CM30 Y=30, 31 are effective only for a station call.
NOTE 2: When providing a Night Message for Automated Attendant, the 2nd Answering Message
which is assigned by CM49 Y=00 2nd data 02XX is used for the Night Message. In that case,
the 2nd data 08 of CM30 Y=30, 31 cannot be assigned for handling of Busy/Not Available
Automated Attendant destination.
TRUNK DATA
DATA
00
01
03
NOTE 1
04
NOTE 2
05
06
08
15
00
15
NOTE 1
NOTE 2
00
01
03
04
06
15
SETTING DATA
MEANING
C.O. line release
Forward to TAS indicator
Forward to Attendant Console
[8300R2]
Forward to DIT station
Music + DT connection for Redial
DT connection for Redial
Automated Attendant:
2nd Answering message + DT connec-
tion for Redial or
Remote Access to System (DISA):
C.O. line release
C.O. line release
Same as CM30 Y=30
C.O. line release
Forward to TAS indicator
Forward to Attendant Console
[8300R2]
Forward to DIT station
DT connection for Redial
C.O. line release
3-214
CM30
: Default
RELATED
COMMAND
CM41 Y=0>34
CM30 Y=04, 05
CM49 Y=02
CM48 Y=2
Same as CM30
Y=30
CM41 Y=0>43
CM30 Y=04, 05
CM48 Y=2
Continued on next page
NWA-033623-001 Rev.3.0
91ch3003.fm
NOVEMBER/12/2008