NEC UNIVERGE SV8300 Command Manual page 515

COMMAND CODE TITLE:
A7
Y
No. MEANING
44 TOS field Precedence for IPT (P2P
CCIS) control packet
TOS: Type of Service
NOTE: This data setting is ineffec-
tive when CMA7 Y=50 is set.
45 Release timer for IPT (P2P CCIS)
Point-to-Multipoint connection
46 Connection method for IPT (P2P
CCIS)
50 DiffServ code point setting for IPT
(P2P CCIS) control packet
NOTE 1: Set this data when the router provides DiffServ QoS, if required.
DiffServ: Differentiated Services; one type of QoS.
QoS
NOTE 2:
When this data is set, the TOS field Precedence set by CMA7 Y=44 is ineffective.
If you want to validate the Precedence set by CMA7 Y=44, set "CCC" (data clear) for CMA7
Y=71.
NOTE 3:
This data setting is required only for Point-to-Multipoint connection.
71 SIP Profile number for control packet
CCIS CHANNEL DATA/IP TRUNK DATA/SIP TRUNK DATA
DATA
IPT (P2P CCIS) RESET
NONE
RESET
IPT (P2P CCIS) RESET
NONE
IPT (P2P CCIS) RESET
: Quality of Service
NONE
SETTING DATA
MEANING
0 PRECEDENCE 0
7 PRECEDENCE 7
15 PRECEDENCE 0
000 30 seconds
001 1 minute
127 127 minutes
Not released
0 Point-to-Multipoint
1 Point-to-Point
00-3F DiffServ code point
No data
00 Profile number for control packet
31
No data
3-466
CMA7
: Default
RELATED
COMMAND
CM35 Y=134
CMA7 Y=71
CM35 Y=161
CMA7 Y=44
CMBA
Continued on next page
NWA-033623-001 Rev.3.0
91ch3007.fm
JULY/18/2008