[Cm40] Cpu Rs-232C Port - NEC UNIVERGE SV8300 Command Manual

COMMAND CODE TITLE:
40
FUNCTION
PORT
Remote Mainte-
nance using external
modem or built-in
modem of CPU blade
(Modem on the mar-
ket)
For example, when the RS-232C ports on Unit02-03 of a CPU blade are also used, the available con-
nections are as follows.
- UNIT01 PORT1: PCPro
- UNIT01 PORT2: SMDR
- UNIT02 PORT1: External Printer for PMS
- UNIT03 PORT1: MCI
PRECAUTION:
(1) The condition of connecting PCPro to the RS-232C is as follows.
- When connecting PCPro to the RS-232C ports other than Unit01, the connection depends on the
data setting by the first data "0/1"(Port 1/Port 2 of Unit01) of CM40 Y=01-06.
- For survival mode or off-line mode, the system data in the Unit can be changed with connecting
PCPro to RS-232C ports of each Unit (the data setting such as MCI or external printer for PMS
is ineffective even if the system data for them is set by CM40 Y=00).
- For on-line mode, the system data in the Unit can be changed with connecting PCPro to RS-
232C ports of each Unit. However, PCPro cannot be connected when the system data such as
MCI or external printer for PMS is set by CM40 Y=00.
(2) The equipment connected to RS-232C ports on Unit02-03 is available only for normal mode
(survival mode and off-line mode are not available).
(3) The port number setting by CM40 Y=00 is required when providing Individual Station Record by
CIS (the connection to RS-232C ports for the equipment is not required).
[8300R1 only]
CPU RS-232C PORT
RS-232C PORTS ON THE CPU BLADE
UNIT01 UNIT02
PORT PORT PORT
1 2 1 2
u u u u
(0) (1) (0) (1)
u: To assign –: Not assigned ( ): Port Location Number
UNIT03 UNIT04
PORT PORT PORT
1 2 1
u u u
(0) (1) (0)
3-257
REMARKS
PORT
2
u Available to use these ports
(1) at the same time
(Maximum 2/system)
NWA-033623-001 Rev.3.0
NOVEMBER/12/2008
CM40
91ch3004.fm