NEC UNIVERGE SV8300 Command Manual page 64

COMMAND CODE
04
Y
No. MEANING
00 Display Language for
Multiline Terminal/
DESKCON LCD,
Default setting patterns
for Multiline Terminal,
Kind of Tone for IP Sta-
tion/TDM, Inquiry No.
in password lock state
for DT700 Series, Sin-
gle Line Telephone
ringing signal for Sta-
tion-to-Station connec-
tion, Single Line
Telephone ringing sig-
nal from a trunk, Spe-
cial ringing signal for
Single Line Telephone
ring
TITLE:
DISPLAY LANGUAGE FOR MULTILINE TERMINAL/DESKCON LCD, DEFAULT SETTING
PATTERNS FOR MULTILINE TERMINAL, KIND OF TONE FOR IP STATION/TDM, INQUIRY
NO. IN PASSWORD LOCK STATE FOR DT700 SERIES, SINGLE LINE TELEPHONE
RINGING SIGNAL FOR STATION-TO-STATION CONNECTION, SINGLE LINE TELEPHONE
RINGING SIGNAL FROM A TRUNK, SPECIAL RINGING SIGNAL FOR SINGLE LINE
TELEPHONE RING, SETTING OF SERVICES, A-LAW/µ-LAW SETTING FOR EACH UNIT
1ST DATA
DATA MEANING
06 Single Line Telephone
ringing signal from a
trunk
2ND DATA
DATA
01 ON
02 2 seconds ON-4 seconds
OFF
03 1 second ON-2 seconds OFF
04 0.5 seconds ON-0.5 seconds
OFF
05 0.25 seconds ON-0.25
seconds OFF
06 0.5 seconds ON-0.5 seconds
OFF-0.5 seconds ON-1.5
seconds OFF
07 0.25 seconds ON-0.25
seconds OFF-0.25 seconds
ON-5.25 seconds OFF
08 0.375 seconds ON-0.25
seconds OFF-0.375 seconds
ON-2 seconds OFF
09 0.25 seconds ON-0.125
seconds OFF-0.25 seconds
ON-0.125 seconds OFF-0.25
seconds ON-2 seconds OFF
10 1 second ON-4 seconds OFF
11 0.25 seconds ON-0.25
seconds OFF-0.25 seconds
ON-4.25 seconds OFF
12 1 second ON-3 seconds OFF
13 0.25 seconds ON-0.25
seconds OFF-0.25 seconds
ON-2.25 seconds OFF
31 2 seconds ON-4 seconds
OFF
3-15
: Default
RELATED
COMMAND
MEANING
Continued on next page
NWA-033623-001 Rev.3.0
NOVEMBER/12/2008
CM04
91ch3001.fm