Example Of Correcting The Data Entry - NEC UNIVERGE SV8300 Command Manual

(2)

Example of correcting the data entry

In STEP 5 in the above (1) example, when
mistake, press
CE
STEP1: CM10 Y=00 has been entered and
pressed.
STEP2: "010102" has been entered instead of "010101" as
intended.
STEP3: "010102" has been assigned as the first data after
pressing
STEP4: If
CE
STEP5: Enter "010101".
STEP6: Press
If, in Step 11 in the above (1) example, when "302" has been entered instead of "301", press
Then the cursor moves to the position of "2".
STEP1: In Step 11, enter "302" instead of "301" as intended.
STEP2: Press
STEP3: Press digit Key "1".
. Then the state returns to STEP 4.
.
DE
is pressed, the state returns to that of Step 1.
, and assign the correct first data.
DE
.
m
has been pressed after entering "010102" by
DE
has been
DE
1-18
Chapter 1 HOW TO USE CAT
CAT OPERATION
1000>
1000>010102
1000>010102: NONE
1000>
1000>010101
1000>010101: NONE
1000>010102: NONE-302
1000>010102: NONE-30
1000>010102: NONE-301
NWA-033623-001 Rev.3.0
.
m
91ch1001.fm