NEC UNIVERGE SV8300 Command Manual page 343

COMMAND CODE TITLE:
42
NOTE 1: The following payload size can be assigned for each CODEC type.
G.711 : 10 ms./20 ms./30 ms./40 ms.
G.722 : 10 ms./20 ms./30 ms./40 ms.
G.723.1: 30 ms.
G.729a : 10 ms./20 ms./30 ms./40 ms.
See NOTE 7 on CM67 Y=00
NOTE 2:
When the payload size setting differs from that for the opposite VoIPDB, the shorter size is
adopted.
1ST DATA
DATA
181 Maximum number of Wake Up Call setting at
the same time
NOTE 1:
Assign the maximum number of Wake Up Call for the same time per every minute.
NOTE 2:
This command is ineffective when setting from PMS (Operated as NONE "No limit").
182 Time for monitoring long call duration of
trunk call
NOTE: When the call time exceeds the time set by this command, a fault information is stored as long-time
call fault.
183 Maximum number of simultaneous calling of
each blade for SLT
[8300R2]
185 Date to total the call charge
[For EU]
NOTE: From the 26th to the day before end of month cannot be assigned.
CODEC LIST
MEANING
2ND DATA
DATA MEANING
01 1 call
32 32 calls
NONE No limit
01 1 hour
60 60 hours
NONE 60 hours
01 1 call
16 16 calls
NONE 4 calls
01 The 1st of the month
25 The 25th of the month
NONE End of month
3-294
CM42
: Default
REMARKS
CM08>850
CM35 Y=286
CMEA
Y=2>04A
Continued on next page
NWA-033623-001 Rev.3.0
91ch3004.fm
NOVEMBER/12/2008