[Cm73] Memory Allocation For Station Speed Dialing - NEC UNIVERGE SV8300 Command Manual

COMMAND CODE TITLE:
73
FUNCTION:
This command is used to allocate memory areas for Station Speed Dialing to individual stations.
PRECAUTION:
The allowed number of 10-Slot Memory Blocks per station number ranges from 1 to 10.
ASSIGNMENT PROCEDURE:
ST + + DE +
73
DATA TABLE:
STATION NUMBER
X Station number
which performs Sta-
XXXXXXXX tion Speed Dialing
NOTE 1:
1000-Slot Memory Block number 04-19 (16000 Memory Parcels) cannot be used for Speed
Dialing with Station Speed Dialing keys provided by CM90 Y=00: F11XX on a Multiline Ter-
minal, and cannot also be used for System Speed Dialing.
NOTE 2: If one of the 1000-Slot Memory Blocks is used for Station Speed Dialing (indicated with
CM08>110, 111, 112, or 176), it cannot also be used for Station Speed Dialing.
MEMORY ALLOCATION FOR STATION SPEED DIALING
STATION NUMBER
+
(1-8 digits)
WW XX Y ZZ
NONE
DATA
DE + + EXE
(7 digits)
SETTING DATA
WW: 1000-Slot Memory Block number (00-19)
XX : 10-Slot Memory Start Block number (00-99)
Y : Facility for programming the dialed number from the
station (0/1=Allowed/Not allowed)
ZZ : Number of 10-Slot Memory Blocks (01-10)
No data
3-379
CM73
: Default
NOTE 1, NOTE 2, NOTE 3
Continued on next page
NWA-033623-001 Rev.3.0
91ch3005.fm