NEC UNIVERGE SV8300 Command Manual page 151

COMMAND CODE TITLE:
0C
Y
No. MEANING
52 Remote System
Upgrade (Main Unit/
Remote Unit)
UPDATING OF IP STATION FIRMWARE/REMOTE SYSTEM
UPGRADE
1ST DATA
DATA MEANING
XX01 Changeover
(changeback)
time
XX: 01-04: Main
Unit No.
05-50:
Remote Unit
No.
NOTE 1:
For CPU program changeover, the system is reset automatically. Therefore,
when executing the program download to multiple units, set the time for the sys-
tem to execute the program changeover for the Main Unit (Unit01) after the pro-
gram download to all units is completed.
NOTE 2:
If a specified changeover time is passed while CPU program is being download-
ed, the changeover of CPU program is executed immediately (second data be-
comes 000000000000).
NOTE 3: If you set the second data to 000000000000 while CPU program is being down-
loaded, the CPU program changeover is executed after CPU program download
is completed.
NOTE 4: If you set the second data to 000000000000 while matching the program version
of Flash ROMs, the CPU program changeover is executed after the program ver-
sion matching is completed.
NOTE 5:
This data is cleared after CPU program changeover is completed.
NOTE 6:
If the system is reset five times during about three minutes, the CPU program
changeback is executed automatically.
NOTE 7:
When the communication between Main Unit and Remote Unit cannot operate
normally, "HARDWARE ERROR" is displayed.
DATA
YYYY MM YYYY: Year (2008-2099)
DD HH mm MM
DD
HH
mm
000000000000 Now executing
CCC Clear
NONE No data
3-102
: Default
2ND DATA
MEANING
: Month (01-12)
: Date (01-31)
: Hour (00-23)
: Minutes (00-59)
Continued on next page
NWA-033623-001 Rev.3.0
91ch3001.fm
NOVEMBER/12/2008
CM0C