NEC UNIVERGE SV8300 Command Manual page 140

COMMAND CODE TITLE:
0B
Y
No. MEANING
1XX 1 : VOIP Port
XX: Unit No. (01-50)
LAN DATA ASSIGNMENT
1ST DATA
DATA MEANING
127 Required IP Address for
the SNMP manager
(Fourth place)/Subnet
Mask of the IP Address
for the SNMP manager
(First place)
NOTE: The following conditions are applied to CM0B Y=0XX/1XX>124-127.
- Only Unit No. 01 can be set by this data.
- This data cannot be entered by CAT when using 8300R1 software.
- When setting the IP address by this data, a period (.) must be entered between
the numbers (example: 255.255.255.254).
- If no IP address for the SNMP manager (first place to fourth place) are set, the
access to the system is allowed to all SNMP managers.
129 IP Address for the trap
source
NOTE 1: Only Unit No. 01 can be set by this data.
NOTE 2: This data cannot be entered by CAT when using 8300R1 software.
NOTE 3: When setting the IP address by this data, a period (.) must be entered
between the numbers (example: 255.255.255.254).
NOTE 4: The IP address assigned by this data is set to the Agent address in
"SNMP TRAP PDU", and the system sends the IP address to the IP
network. Wherever the system is located on the LAN, system adminis-
trator can manage it easily by setting of the convenient IP address.
2ND DATA
DATA
XXX.XX IP Address for the SNMP
...X manager
(Maximum 15 digits)
XXX.XXX.XXX.XXX=
0.0.0.1-255.255.255.254
NOTE
NONE No data
XXX.XX IP Address for the trap
...X source
(Maximum 15 digits)
XXX.XXX.XXX.XXX=
0.0.0.1-255.255.255.254
NONE No data
3-91
RESET
: Default
RELATED
COMMAND
MEANING
Continued on next page
NWA-033623-001 Rev.3.0
NOVEMBER/12/2008
CM0B
91ch3001.fm