Table of Contents
Advertisement
Chapter 2 Preparations
Installing the N8117-01A extra RS-232C connector kit
Install a PCI card to connect to the PCI slot by using the following procedure. For details, refer to the
instruction manual supplied with the connector kit.
The component parts for N8117-01A are as follows:
Item no.
RS-232C connector Kit
<1>
User's Guide
<2>
RS-232C cable (A)
<3>
RS-232C cable (B)
<4>
PCI bracket (1)
<5>
PCI bracket (2)
<4>
This product uses a combination of items <3> and <5>.
Follow the procedure below to install the kit.
1.
See Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
2.
To remove the side cover, see Chapter 2 (1.3 Removing the Side Cover).
3.
Assemble <3> RS-232C cable (B) and <5> PCI bracket (2).
4.
To open the PCI retention latch, see Chapter 2 (1.9.3 Installation).
5.
Remove the blank cover aligned with the slot where
you install a card.
56
Item name
Specification
856-125671-002
804-063264-020
804-062746-820
243-112122-001
243-112122-002
<2>
Important
Keep the removed blank cover for future use.
Express5800/T110j User's Guide
1. Installing Internal Optional Devices
Amount
Remark
1
1
Not available for this server
1
1
Preinstalled to cable
1
For full height PCI
<5>
<3>
Advertisement
Table of Contents
