Table of Contents
Advertisement
Chapter 2 Preparations
1.12.5 RS-232C Connector Kit
Install the RS-232C Connector Kit to a PCI slot in the following procedure.
Connector for RS-232C Connector Kit
1.
Refer to steps 1 to 7 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2.
Use the RS-232C cable (B) and PCI bracket (2) that comes with RS-232C Connector Kit
PCI BRACKET (2)
3.
Remove the screws attached to the RS-232C cable (B) and connect the RS-232C cable (B) to the PCI
bracket (2) by using the removed screws.
4.
Remove the COM slot cover referring to Chapter 2 (1.12.3 Installing PCI board).
5.
Check that the end of the bracket is correctly inserted in the frame guide, and then return the lock lever to
its original position to firmly lock the bracket.
94
Express5800/T120e User's Guide
1. Installing Internal Optional Devices
RS-232C cable (B)
Advertisement
Table of Contents
