17-1 Probe Switches; 17-1-1 Prb-Mbb101C77-M - Panasonic F77G User Manual

Chapter 17 Appendices

17-1 Probe Switches

17-1-1 PRB-MBB101C77-M

- This probe must be used with the following boards.
Connector board: PX-CN101-M
-
- MBB board: PRB-MBB101C77-M
Adapter board: PRB-ADP101-64-M
-
- Dummy target: PRB-DMY101C77-M
The dummy target should be connected when ICE is operated independently, the adapter
board should be connected at connection to the target.
The power supply voltage of ICE is between 3.0 V to 3.6 V.
This probe is mounted the switches for mask option.
-
The option switches are not available.
-
Top view of MBB board
-When ICC is operated independently
[PRB-DMY101C77-M]
XVII- 2 Probe Switches
Figure1: Layout of option switches
Dummy target
Figure2: Composition with PRB-MBB101C77-M
Option
Switches
Default control
OFF
OFF
OFF
OFF
OFF
OFF
- At connection to the target
Connector board
[PX-CN101-M]
MBB board
[PRB-MBB101C77-M]
Adapter board
[PRB-ADP101-64-M]
OP0
OP1
OP2
OP3
OP4
OP5